WeePro ®️ Universal PHA Insert

Install :

Step 1: Wash your hands. Find a clean table.

Step 2: Open the packaging of WeePro® anti-fog visor insert. You will get one insert, one piece soft fabric, instruction carton paper.

Step 3: Clean up your helmet visor with the soft fabric.

Step 4: Remove the Positioning Mask with a red tag.

Step 5: Install the positioning mask on the outside of your visor. You can adjust the position freely until it is on a comfortable position. The cross should be in the middle of the visor.

Step 6: Press the insert with your two hands to fit the visor. Match the insert’s middle cross with the cross on the positioning mask.

Step 7: Use one hand to fix the insert. Use another hand’s finger with fabric to press around to seal the visor insert neatly.

Step 8: Tear off the mask with the blue tag. 

Step 9: Tear off the outside positioning mask with the red tag.

WeePro® PHA (Photochromic (P) , Heat-resistant (H) , Anti-fog (A) ) Insert

Sun-glare is a headache for most motorcyclists. You even can’t open the eyes when you are riding under sunny or cloudy days.

WeePro® PHA Insert can change from clear to different dark levels rapidly under different level of UV ray. The photochromic visor is clear at night. During the day, the PHA insert will be slightly darken and becomes light grey. And it will self-tint to a decent level of dark on a sunny day.

With an UV (Ultraviolet) and IR (Infrared) filtering property, WeePro® PHA Insert can cut 99.9% UV light and more than 80% IR light, which can prevent you from burning by strong sunlight during long riding.

WeePro® PHA Insert has a promising anti-fog performance. The adhesive frame airtight seal creates a thermal barrier. It can together support you to prevent the condensation of your visor.